Ice maker
Scale shaped carbon dioxide all stainless steel evaporator ice making system
- Standard operating conditions: ambient temperature of 25 ℃; The water temperature is 15 ℃
- Refrigerant: R744
- Cooling capacity condition: condensation temperature is -5 ℃; The evaporation temperature is -20 ℃
- Water supply pressure: 0.15-0.5MPa
- Scale shaped carbon dioxide commercial ice making system without refrigeration compressor unit
- Power supply: 380V/50Hz/3N
- Pressure parameters of the transcritical CO2 ice making system: maximum working pressure of 90 bar, factory inspection pressure of 250 bar
Performance Parameters
| Model | External dimensions of ice maker | Piping size for docking refrigeration system | |||
| Long 1 | Width 1 | High 1 | Inlet pipe diameter | Diameter of suction pipe | |
| PB0.3C | 800mm | 750mm | 620mm | ∅10mm | ∅10mm |
| PB0.5C | 800mm | 750mm | 700mm | ∅ 12.7mm | ∅16mm |
| PB0.8C | 800mm | 750mm | 790mm | ∅ 12.7mm | ∅16mm |
| PB1C | 1050mm | 850mm | 830mm | ∅ 12.7mm | ∅19mm |
| PB1.5C | 1050mm | 850mm | 920mm | ∅ 12.7mm | ∅19mm |
| PB2C | 1050mm | 850mm | 1080mm | ∅12.7mm | ∅19mm |
| PB2.5C | 1050mm | 850mm | 1160mm | ∅ 12.7mm | ∅19mm |
| PB3C | 1050mm | 850mm | 1250mm | ∅ 12.7mm | ∅19mm |
| Model number | Daily ice production under standard conditions | Cooling capacity required | Power of deceleration motor | Pump motor power | Water demand | Inlet pipe diameter (external thread) | Drainage pipe diameter | Net quantity |
| PB0.3C | 0.3T | 1.65KW | 120W | 10W | 13L/H | 3/4″GAS | ∅21 | 75Kg |
| PB0.5C | 0.5T | 2.75KW | 120W | 10W | 17L/H | 3/4″GAS | ∅21 | 85Kg |
| PB0.8C | 0.8T | 4.5KW | 120W | 10W | 34L/H | 3/4″GAS | ∅21 | 117Kg |
| PB1C | 1T | 5.5KW | 180W | 10W | 42L/H | 3/4″GAS | ∅21 | 130Kg |
| PB1.5C | 1.5T | 8.5KW | 180W | 10W | 63L/H | 3/4″GAS | ∅21 | 138Kg |
| PB2C | 2T | 11KW | 180W | 10W | 85L/H | 3/4″GAS | ∅21 | 146Kg |
| PB2.5C | 2.5T | 13.5KW | 180W | 10W | 105L/H | 3/4″GAS | ∅21 | 155Kg |
| PB3.0C | 3T | 16.5KW | 180W | 20W | 125L/H | 3/4″GAS | ∅21 | 165Kg |