Ice maker
Flake shaped fluorine cooled all stainless steel evaporator ice making system
- Standard operating conditions: ambient temperature of 25 ℃; The water temperature is 15 ℃
- Refrigerant: R22/R404A
- Cooling capacity condition: condensation temperature is 40 ℃; The evaporation temperature is -22 ℃
- Water supply pressure: 0.15-0.5MPa
- The scale shaped fluorine cooled commercial ice making system does not come with a refrigeration compressor unit
- Power supply: 380V/50Hz/3N
Performance Parameters
| Model | External dimensions of ice maker | Piping size for docking refrigeration system | |||
| Long 1 | Width 1 | High 1 | Inlet pipe diameter | Diameter of suction pipe | |
| PB0.3F | 800mm | 750mm | 620mm | 10mm | 10mm |
| PB0.5F | 800mm | 750mm | 700mm | 12.7mm | 16mm |
| PB0.8F | 800mm | 750mm | 790mm | 12.7mm | 16mm |
| PB1F | 1050mm | 850mm | 830mm | 12.7mm | 22mm |
| PB1.5F | 1050mm | 850mm | 920mm | 12.7mm | 22mm |
| PB2F | 1050mm | 850mm | 1080mm | 12.7mm | 22mm |
| PB2.5F | 1050mm | 850mm | 1160mm | 12.7mm | 22mm |
| PB3F | 1050mm | 850mm | 1250mm | 12.7mm | 22mm |
| Model number | Daily ice production under standard conditions | Cooling capacity required | Power of deceleration motor | Pump motor power | Water demand | Inlet pipe diameter (external thread) | Drainage pipe diameter | Net quantity |
| PB0.3F | 0.3T | 1.65KW | 120W | 10W | 12.5L/H | 3/4″GAS | ∅21mm | 75kg |
| PB0.5F | 0.5T | 2.75KW | 120W | 10W | 21L/H | 3/4″GAS | ∅21mm | 85kg |
| PBO.8F | 0.8T | 4.5 KW | 120W | 10W | 34L/H | 3/4″GAS | ∅21mm | 117kg |
| PB1F | 1T | 5.5 KW | 180W | 10W | 42L/H | 3/4″GAS | ∅21mm | 130kg |
| PB1.5F | 1.5T | 8.5KW | 180W | 10W | 63L/H | 3/4″GAS | ∅21mm | 138kg |
| PB2F | 2T | 11 KW | 180W | 10W | 85L/H | 3/4″GAS | ∅21mm | 146kg |
| PB2.5F | 2.5T | 13.5KW | 180W | 10W | 105L/H | 3/4″GAS | ∅21mm | 155kg |
| PB3F | 3.0T | 16.5KW | 180W | 20W | 125L/H | 3/4″GAS | ∅21mm | 165kg |